High Airs SFC series containment fill stations offer the ultimate in safety and convenience. An enclosed steel chamber offers maximum protection in the event of a catastrophic cylinder failure. Our loading heights are ergonomically designed to reduce operator fatigue.

The fill station is ergonomically designed to allow the filling of several SCBA or SCUBA bottles either separately or simultaneously. Access to the enclosure for loading the SCBA /SCUBA cylinders shall be via a manually operated, tilt out door. The fill station door is provided with assisting devices to assure smooth operation and reduce operator fatigue. The fill station door is constructed of 5mm plate steel. The SCBA /SCUBA cradle contains several fill positions. Each fill position is lined with material to protect each SCBA /SCUBA cylinder from abrasion. The carriage is mounted on a pivoting system that will lower the cylinders to a near horizontal position and allow full access to all SCBA /SCUBA bottles, fill hoses and valve assemblies with minimal operator fatigue .

      















[Advantages]

•Compliant to NFPA Standard.

•Body dual-layer structure.Outer carton is made from double-layer 5mm steel plate; the placement of two carbon fiber bottles are individually separated within carton, middle is spilt by using 6mm steel plate, the front side is made by 3mm steel plate, door is made from 5mm steel plate, the thickness of steel plate between the explosion-proof penumatic box and personnel is 8mm.

•There is pressure relief hole between the inner layer of outside carton and the bottom of the box, when gas cylider blast, the inflated conpressed air is exhausted through the space between inside and outside of box and the pressure relief hole in the bottom of the box, to avoid the injure to staff.

•Open the door interlocking device, when opening, automatic cut-off pneumatic circuit, when closing, automatically open the pneumatic circuit.

•Separate filling hose and filling valve,can chose the filling quantity as per your requirement

•Close the door self-lock device, to prevent the door opening when the pneumatic cylinder explosion.

•Low height of the cylinder filling, easy to operation.

•Vent valve including vent silencer.                                       

•The cylinder bracket uses rotary structure, and is equipped with pneumatic spring, to convenient switch and reduce operator load.                     

•6.8L and 9L pneumatic cylinder universal design.                          

•Cascade system to ensure high efficiency and shore filling time.          

•Regulator to prevent carbon fiber bottle overpressure.

MODELDESCRIPTIONDIMENTION MM N.W. kg
SFC1S1 Cylinder Containement cabinet(No valve/Gauge)560x460x950180
SFC22 Cylinders Containement cabinet 560x662x1339230
SFCR22 Cylinders Containement cabinet with regulator560x662x1339250
SFC44 Cylinders Containement cabinet 1110x591x1339330
SFCR44 Cylinders Containement cabinet with regulator1110x591x1339350